American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Digital Caliper Reads in Fractions Springfield OR

These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Woodcraft - Eugene, OR
(541) 685-0677
Sheldon Plaza Shopping Center
Eugene, OR

Data Provided by:
The Home Depot
(541)434-9025
808 Seneca Rd
Eugene, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Gateway Mall
(541) 741-7099
3030 Gateway St
Springfield, OR
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:10-19
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:10-19

Fastenal- Springfield
541-988-4345
4660 Main St Building C Suite 420 Springfield, OR, 97478
Springfield, OR
 
ABC Supply Co.,Inc/Eugene
541-683-3222
4227 W. 6th Ave. Eugene, OR, 97402
Eugene, OR
 
The Home Depot
(541)344-1312
1045 Green Acres Rd
Eugene, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Square Deal Lumber Company
(541) 746-2576
4992 E Main
Springfield, OR
 
Wilco Farm Stores - Springfield
(541) 726-0950
1401 21st Street
Springfield, OR
 
United Rentals/Eugene
(541) 465-1235
3735 W 11th ave Eugene, OR, 97402
Eugene, OR
 
Eugene True Value Hardware
(541) 342-5191
2825 Willamette St
Eugene, OR
 
Data Provided by:

Digital Caliper Reads in Fractions

Digital Caliper Reads in Fractions

    

Calipers are handy to have in any shop. You can use them to check a board's thickness, a drill bit's diameter or a dado's width. Unfortunately, most calipers are so difficult to decipher that woodworkers avoid using them like they avoid sanding. Stop the presses—I've found the ultimate caliper. It's digital and reads in regular old fractions, something my brain understands pretty well. To use it, you don't have to convert decimal readings, just read the display. It's wonderfully simple, and at $38, it's competitively priced.
These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Source 
The Craftsman Gallery, (866) 966-3728,
www.craftsmangallery.com  Fractional caliper, 4-in., #30-144, $38; 6 in., #30-145, $38.


Click here to read the rest of the article from American Woodworker