American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Digital Caliper Reads in Fractions Williston ND

These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Williston True Value
(701) 572-7300
10 E 26th Street
Williston, ND
 
Williston - Auth Hometown
(701) 572-6000
2308 11Th Ave West
Williston, ND
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

Napa Auto Parts/do It Best Hdw
(701) 947-5155
16 North 8th St
New Rockford, ND
 
Martinsen Home Center
(701) 724-3443
309 Main St
Forman, ND
 
Dale's Hardware
(701) 647-2878
03 North Main
Kulm, ND
 
Farmers Union Lumber
(701) 572-8356
320 26th Street E
Williston, ND
 
The Home Depot
(701)282-2078
4700 17th Avenue SW
Fargo, ND
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 12:00pm-8:00pm

Simonson Lumber & Hdw True Value
(701) 775-4292
820 3rd St N
Grand Forks, ND
 
Wahpeton Ace Hardware
(701) 642-5544
1011 Dakota Ave
Wahpeton, ND
 
Central City Lumber
(701) 652-3101
1095 5th Avenue N
Carrington, ND
 

Digital Caliper Reads in Fractions

Digital Caliper Reads in Fractions

    

Calipers are handy to have in any shop. You can use them to check a board's thickness, a drill bit's diameter or a dado's width. Unfortunately, most calipers are so difficult to decipher that woodworkers avoid using them like they avoid sanding. Stop the presses—I've found the ultimate caliper. It's digital and reads in regular old fractions, something my brain understands pretty well. To use it, you don't have to convert decimal readings, just read the display. It's wonderfully simple, and at $38, it's competitively priced.
These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Source 
The Craftsman Gallery, (866) 966-3728,
www.craftsmangallery.com  Fractional caliper, 4-in., #30-144, $38; 6 in., #30-145, $38.


Click here to read the rest of the article from American Woodworker