American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Digital Plunge Routers North Pole AK

This page provides relevant content and local businesses that can help with your search for information on Digital Plunge Routers. You will find informative articles about Digital Plunge Routers, including "Digital Plunge Router". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in North Pole, AK that can help answer your questions about Digital Plunge Routers.

Fastenal- Fairbanks
907-455-8600
3580 Cartwright Ct Unit A Fairbanks, AK, 99701
Fairbanks, AK
 
Spenard Builders Supply- Fairbanks
907-450-2200
2460 Phillips Field Road Fairbanks, AK, 99701
Fairbanks, AK
 
Denali Industrial Supply Inc
907-452-4524
2800 Cushman St Fairbanks, AK, 99701
Fairbanks, AK
 
Fastenal- Fairbanks
907-455-8600
3580 Cartwright Ct Unit A Fairbanks, AK, 99701
Fairbanks, AK
 
Alaska Industrial Hardware- Anchorage
907-272-1441
2716 Commercial Drive Anchorage, AK, 95501
Anchorage, AK
 
Denali Industrial Supply Inc
907-452-4524
2800 Cushman St Fairbanks, AK, 99701
Fairbanks, AK
 
LOWE'S OF S. ANCHORAGE, AK
907 349-8889
10900 OLD SEWARD HIGHWAY ANCHORAGE, AK, 99515
Anchorage, AK
 
Alaska Industrial Hardware- Anchorage
907-276-7201
2192 Viking Drive Anchorage, AK, 99501
Anchorage, AK
 
Alaska Industrial Hardware- Wasilla
907-376-5274
751 West Parks Hwy Wasilla, AK, 99654
Wasilla, AK
 
Alaska Industrial Hardware- Anchorage
907-561-1781
4700 Old Seward Hwy Anchorage, AK, 99503
Anchorage, AK
 

Digital Plunge Router

 

     

Digital readout has finally arrived on a mainstream router. This new 10-amp plunge router from Craftsman has an integrated LED screen that allows you to precisely set the depth of cut, in fractions of an inch or millimeters, without using a scale or ruler. Adjusting the depth of cut on many plunge routers can be a real hassle, but not on this machine. The Craftsman system is easy to use because it's so intuitive. As with all plunge routers, the first step is to lower the bit until it touches your workbench and engage the plunge lock lever to hold the bit in position. Next, rotate a depth-of-cut knob to lower a stop rod until it contacts the router's base. Standard procedure so far, but now comes the new, digital part. Press a zeroing button, then dial up the stop rod. As you turn this knob, the readout screen clearly indicates how deep the bit will cut, to the nearest 1/64-in. A simple twist of another knob locks the stop rod in place, and you're ready to go.
Other good features on this router include 1/4-in. and 1/2-in. collets, variable speed, soft start, a conveniently located on/off switch, and a dust shield and dust port. This router would work well in a router table, but it lacks a couple of user-friendly features. Although you get a long extension knob for setting the height of a bit from underneath the table, you can't raise the collet high enough to cha...

Click here to read the rest of the article from American Woodworker