American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Double Scrollsaw Blade Life Holt MI

When the scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood is usually less than 1/2 in. thick. To get more life out of the blade, you can make an auxiliary table that raises the workpiece, so you can cut with the top half of the blade when the bottom half gets dull.

The Home Depot
(517)381-0650
1749 Newman Rd
Okemos, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

PARKER LUMBER
(517) 543-7068
760 S. Stine Road
Charlotte, MI

Data Provided by:
Ace Hardware of Holt
(517) 694-3575
1960 Cedar St, Edru skate rink
Holt, MI
 
Apco Inc.
(517) 882-2455
5511 Enterprise Dr
Lansing, MI
 
Lowe's
(517) 699-2940
6821 South Cedar Street
Lansing, MI
Hours
M-SA 7 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(517)323-0229
936 S Waverly Rd
Lansing, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Johnson's Workbench
(517) 543-2727
563 N Cochran Ave
Charlotte, MI

Data Provided by:
Kmart 4382 / Cross Merch
(517) 393-8770
5400 Cedar St S
Lansing, MI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

LOWE'S OF S. LANSING, MI
517 699-2940
6821 SOUTH CEDAR STREET LANSING, MI, 48911
Lansing, MI
 
Fastenal- Lansing
517-482-2300
1115 South Pennsylvania Ave Lansing, MI, 48912
Lansing, MI
 
Data Provided by:

Double Scrollsaw Blade Life

Double Scrollsaw Blade Life

When my scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood I cut is usually less than 1/2 in. thick. To get more life out of my blade, I made an auxiliary table that raises the workpiece, so I can cut with the top half of the blade when the bottom half gets dull.

I made the table by screwing together pieces of 3/4-in. melamine and 1/2-in. plywood and edge-banding all four sides. I drilled a 7-16-in. hole in the center for the blade and cut a 1/16-in. slot in from the back so I can slip the table on and off without removing the blade. 

I filed slight chamfers on the top of the hole and slot, so they won’t catch on the workpiece. I also widened the slot at the back, so it easily slips around the blade. Cleats glued on the bottom hold the table securely in place on the saw (see photo, below). 

I’ve discovered that it takes less time to install the table than it takes to change a blade, so in addition to saving a few bucks in scrollsaw blades, my table saves time, too. 

Click here to read the rest of the article from American Woodworker