American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Double Scrollsaw Blade Life Texarkana AR

When the scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood is usually less than 1/2 in. thick. To get more life out of the blade, you can make an auxiliary table that raises the workpiece, so you can cut with the top half of the blade when the bottom half gets dull.

The Home Depot
(903)832-6002
4110 Saint Michael Dr
Texarkana, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Dot's Ace Hardware
(903) 838-0059
3411 Richmond Rd
Texarkana, TX
 
General Supply True Value
(903) 793-5668
1019 Spruce St
Texarkana, TX
 
LOWE'S OF TEXARKANA, TEX.
903 831-5700
501 WALTON DRIVE TEXARKANA, TX, 75501
Texarkana, TX
 
Lowe's
(903) 831-5700
501 Walton Drive
Texarkana, TX
Hours
M-SA 6 am - 9 pm
SU 8 am - 8 pm

Central Mall
(903) 831-3300
1 Central Mall
Texarkana, TX
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-21
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-21

SOUTHERN FASTENING SYSTEMS/Texarkana
(903) 792-7719
1413 North State Line Texarkana, TX, 75501
Texarkana, TX
 
Star International Inc
(903) 832-5044
250 S Kings Highway
Texarkana, TX
 
Kmart 7309 / Cross Merch
(903) 832-1588
4520 W 7Th St
Texarkana, TX
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Southtown True Value Hdwe
(870) 898-5079
550 E Wood St
Ashdown, AR
 

Double Scrollsaw Blade Life

Double Scrollsaw Blade Life

When my scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood I cut is usually less than 1/2 in. thick. To get more life out of my blade, I made an auxiliary table that raises the workpiece, so I can cut with the top half of the blade when the bottom half gets dull.

I made the table by screwing together pieces of 3/4-in. melamine and 1/2-in. plywood and edge-banding all four sides. I drilled a 7-16-in. hole in the center for the blade and cut a 1/16-in. slot in from the back so I can slip the table on and off without removing the blade. 

I filed slight chamfers on the top of the hole and slot, so they won’t catch on the workpiece. I also widened the slot at the back, so it easily slips around the blade. Cleats glued on the bottom hold the table securely in place on the saw (see photo, below). 

I’ve discovered that it takes less time to install the table than it takes to change a blade, so in addition to saving a few bucks in scrollsaw blades, my table saves time, too. 

Click here to read the rest of the article from American Woodworker