American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Double Scrollsaw Blade Life Tuscumbia AL

When the scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood is usually less than 1/2 in. thick. To get more life out of the blade, you can make an auxiliary table that raises the workpiece, so you can cut with the top half of the blade when the bottom half gets dull.

The Home Depot
(256)764-5037
351 Seville Street
Florence, AL
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

Fastenal- Muscle Shoals
256-383-9901
2300 East 2nd Street Muscle Shoals, AL, 35661
Muscle Shoals, AL
 
Ford City Ace Hardware
(256) 446-9729
14497 County Line Rd
Muscle Shoals, AL
 
Muscle Shoals - D
(256) 383-7716
3401 Woodward Ave
Muscle Shoals, AL
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

Fastenal- Florence
256-764-0183
4326 Helton Drive Florence, AL, 35630
Florence, AL
 
Southern Fastening Systems- Muscle Shoals
256-381-3628
635 Fairgrounds Rd. Muscle Shoals, AL, 35662
Muscle Shoals, AL
 
LOWE'S OF MUSCLE SHOALS, ALA.
256 314-0334
3415 WOODWARD AVENUE MUSCLE SHOALS, AL, 35661
Muscle Shoals, AL
 
Lowe's
(256) 314-0334
3415 Woodward Avenue
Muscle Shoals, AL
Hours
M-SA 7 am - 9 pm
SU 8 am - 7 pm

Peck Ace Hardware
(256) 764-3282
1118-20 N Wood Ave
Florence, AL
 
Regency Sq Mall
(256) 760-3400
301 Cox Creek Pkwy
Florence, AL
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:13-21
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:13-21

Double Scrollsaw Blade Life

Double Scrollsaw Blade Life

When my scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood I cut is usually less than 1/2 in. thick. To get more life out of my blade, I made an auxiliary table that raises the workpiece, so I can cut with the top half of the blade when the bottom half gets dull.

I made the table by screwing together pieces of 3/4-in. melamine and 1/2-in. plywood and edge-banding all four sides. I drilled a 7-16-in. hole in the center for the blade and cut a 1/16-in. slot in from the back so I can slip the table on and off without removing the blade. 

I filed slight chamfers on the top of the hole and slot, so they won’t catch on the workpiece. I also widened the slot at the back, so it easily slips around the blade. Cleats glued on the bottom hold the table securely in place on the saw (see photo, below). 

I’ve discovered that it takes less time to install the table than it takes to change a blade, so in addition to saving a few bucks in scrollsaw blades, my table saves time, too. 

Click here to read the rest of the article from American Woodworker