American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Drill Press Cabinet Bend OR

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(541)382-1020
63465 Highway 97
Bend, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

NW Staple Supply
541-383-2466
1110 SE Reed Market Rd Bend, OR, 97702
Bend, OR
 
Backstom Builders Center
(541) 382-6861
PO Box 5217 Bend, OR, 97708
Bend, OR
 
Ace Hardware & Paint
(541) 389-9094
660 NE 3rd St Ste 1, Next to Safeway on 3rd
Bend, OR
 
LOWE'S OF BEND, OR
541 693-2560
20501 COOLEY ROAD BEND, OR, 97701
Bend, OR
 
The Home Depot
(541)516-3990
300 NW Quince Avenue
Redmond, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

NorthWest Staple
(541) 383-2466
1110 SE Reed Market Rd Bend, OR, 97702
Bend, OR
 
Miller True Value Hdw & Lbr
(541) 382-4301
110 Ne Greenwood Ave
Bend, OR
 
Bend River Mall
(541) 388-5746
3188 N Highway 97 - Ste 119
Bend, OR
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-20
Sun:11-19
Store Features
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-20
Sun:11-19

Fastenal- Bend
541-330-6519
62860 Boyd Acres Road Suite A Bend, OR, 97701
Bend, OR
 

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker