American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet Broken Arrow OK

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(918)459-3700
9808 East 71st
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)299-3028
8880 S Delaware Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)583-3400
901 S Elgin Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's
(918) 355-4926
1900 East Hillside Drive
Broken Arrow, OK
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Westlake Ace Hardware
(918) 258-1261
708 S Aspen Ave
Broken Arrow, OK
 
The Home Depot
(918)632-0069
4041 S Sheridan
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Tulsa
(918) 384-0100
5511 E. 41st Street
Tulsa, OK

Data Provided by:
The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Southern Fastening Systems- Broken Arrow
918-254-6070
2104 North Willow Avenue #A Broken Arrow, OK, 74012
Broken Arrow, OK
 
LOWE'S OF BROKEN ARROW, OK
918 355-4926
1900 EAST MADISON STREET BROKEN ARROW, OK, 74012
Broken Arrow, OK
 
Data Provided by:

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker