American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet Essex Junction VT

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(802)872-0039
759 Harvest Lane
Williston, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Bibens Ace-Essex
(802) 879-0249
15 Essex Way, Essex Shoppes & Cinema
Essex Junction, VT
 
Lowe's of Essex
802-662-9131
10 Sussie Wilson Rd Essex Junction, VT, 05452
Essex Junction, VT
 
Harvey Industries/Williston
(802) 660-8111
71 Leroy Road Williston, VT, 05495
Williston, VT
 
Jerihill Home Center
(802) 899-1277
249 Vt Route 15
Jericho, VT
 
Essex Equipment
(802) 879-0767
26 Kellogg Road
Essex Junction, VT
 
Lowe's
(802) 662-9131
10 Susie Wilson Road
Essex Junction, VT
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

Harvey Industries/White River Jct
(802) 295-3700
1354 North Heartland Rd White River Jct, VT, 05495
White River Jct, VT
 
Russell Supply
(802) 863-1177
9 Gregory Drive South Burlington, VT, 05407
South Burlington, VT
 
Lowe's of South Burlington, VT
802-318-9052
189 Hannaford Drive South Burlington, VT, 05403
South Burlington, VT
 

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker