American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Drill Press Cabinet Lewiston ME

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

Drillen True Value
(207) 783-4600
1086 Sabattus St
Lewiston, ME
 
Handy True Value Hdw
(207) 345-2091
9 Depot Sq
Mechanic Falls, ME
 
Lowe's
(207) 373-7016
250 Bath Road
Brunswick, ME
Hours
M-SA 6 am - 9 pm
SU 8 am - 7 pm

Gray True Value Hardware
(207) 657-3502
15 Main St
Gray, ME
 
K & G Auto & True Value Hardware
(207) 737-8383
65 Main St
Richmond, ME
 
Lowe's
(207) 514-2300
650 Turner Street
Auburn, ME
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

Northland True Value Hardware
(207) 225-6000
284 Ricker Hill Road
Turner, ME
 
Freeport True Value Hardware
(207) 865-9557
262 Us Rte 1 Ste 1
Freeport, ME
 
Cooks Corner S/C
(207) 798-6051
8 Gurnet Rd
Brunswick, ME
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-18.5
Store Features
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-18.5

Casco Bay Home Improvement
(888) 373-5070
PO Box 1568
Lewiston, ME
 

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker