American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Drill Press Cabinet Oxford OH

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(513)887-1450
6562 Winford Ave
Hamilton, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Cincinnati, OH
(513) 874-6181
Gilmore Square - Next to Forest Fair Mall
Fairfield, OH

Data Provided by:
Access Door Controls
(513) 202-9116
P.O. Box 67
Harrison, OH

Data Provided by:
The Home Depot
(513)671-6012
1266 Omniplex Drive
Cincinnati, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Whittaker-Smith Fencing
(513) 755-2779
6672 Wooden Shoe Drive
Liberty Township, OH

Data Provided by:
Overhead Door Co. of Greater Cincinnati/Mooney & Moses of Ohio
(513) 346-4000
9345 Princeton-Glendale Road
Hamilton, OH

Data Provided by:
The Home Depot
(513)367-7700
400 Comfort Drive
Harrison, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(513)923-9157
3461 Joseph Rd
Cincinnati, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

A-E Door Sales & Service
(513) 742-1984
1260 West Sharon Road
Cincinnati, OH

Data Provided by:
Simpson Fence Co. Inc.
(513) 424-5110
4840 Oxford State Road
Middletown, OH

Data Provided by:
Data Provided by:

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker