American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Drill Press Cabinet Poulsbo WA

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(360)779-9924
21750 Market Place NW
Poulsbo, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(206)361-9600
11616 Aurora Ave N
Seattle, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Compton Lumber & Hardware
(206) 623-5010
3847 1st Ave South PO Box 84972
Seattle, WA

Data Provided by:
The Home Depot
(206)762-2126
7345 Delridge Way SW
Seattle, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

DCS Industrial Supply
(360) 697-3280
3203 Trotten Rd NE Unit F Poulsbo, WA, 98370
Poulsbo, WA
 
The Home Depot
(360)307-9200
10991 Silverdale Way NW
Silverdale, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rockler Woodworking and Hardware #2
(206) 634-3222
3823 Stone Way North
Seattle, WA

Data Provided by:
The Home Depot
(206)467-9200
2701 Utah Ave South
Seattle, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

James Lumber and Ace Hardware
(360) 779-5571
19801 Viking Ave NW, Across from bright blue NAPA.
Poulsbo, WA
 
Coast Do it Best Hardware
(360) 779-2000
19472 7th Avenue N E
Poulsbo, WA
 
Data Provided by:

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker