American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet Sevierville TN

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(865)428-0116
128 Allensville Road
Sevierville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(865)573-1457
140 Green Road
Knoxville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Kmart 9735 / Cross Merch
(865) 428-0014
217 Forks Of River Pkwy
Sevierville, TN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

LOWE'S OF SEVIERVILLE, TENN.
865 453-3115
610 WINFIELD DUNN PKWY SEVIERVILLE, TN, 37876
Sevierville, TN
 
Trentham's Ace Hardware
(865) 436-5173
1025 E Parkway
Gatlinburg, TN
 
Jeffries Fine Lumber
(865) 573-5876
8807 Valgro Road
Knoxville, TN

Data Provided by:
Fastenal- Sevierville
865-908-7554
1012 Old Knoxville Hwy Ste 1 Sevierville, TN, 37862
Sevierville, TN
 
Blalock Hardware Co Inc
(423) 453-3601
703 E Gate Road
Sevierville, TN
 
Lowe's
(865) 453-3115
610 Winfield Dunn Parkway
Sevierville, TN
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Lowe's
(865) 475-1361
638 E. Broadway Boulevard
Jefferson City, TN
Hours
M-SA 7 am - 9 pm
SU 9 am - 7 pm

Data Provided by:

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker