American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet South Bend IN

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

Johnson's Workbench - IN
(574) 277-8350
51315 North US-33
South Bend, IN

Data Provided by:
Eberly Woods
(269) 697-4615
4673 Woodside Drive
Buchanan, MI

Data Provided by:
Builders Store
(574) 288-5025
1319 Mishawaka
South Bend, IN
 
Martin's Do it Best Hardware
(574) 233-8229
1302 Elwood Street
South Bend, IN
 
Lowe's
(574) 299-5126
250 West Ireland Road
South Bend, IN
Hours
M-SA 6:30 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(574)273-8601
317 Indian Ridge Blvd
Mishawaka, IN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Argos Do it Best Hardware
(574) 892-6700
200 W Walnut
Argos, IN
 
Electric Tool/Ever Dry
4647 Cleveland Rd South Bend, IN, 46628
South Bend, IN
 
Big C Do it Best Lumber
(574) 272-6500
125 Dixieway North
South Bend, IN
 
Fastenal- South Bend
574-234-8707
3218 Sugar Maple Court Unit A South Bend, IN, 46628
South Bend, IN
 
Data Provided by:

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker