American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet West Des Moines IA

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

The Home Depot
(515)221-2233
3700 University Ave
West Des Moines, IA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(515)287-7269
4900 SE 14th St
Des Moines, IA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Cappel's Ace Hardware
(515) 225-4323
245 50th St, At the corner of 50th and E.P. True Pkwy
West Des Moines, IA
 
Clive - D
(515) 222-0868
10331 University Ave
Clive, IA
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

WOODSMITH
10320 HICKMAN ROAD CLIVE, IA, 50325
Clive, IA
 
The Home Depot
(515)251-5819
10850 Plum Drive
Urbandale, IA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(515)963-1890
2335 SE Delaware Ave
Ankeny, IA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

True Value Hardware
(515) 279-9905
100 Grand Ave
West Des Moines, IA
 
LOWE'S OF W. DES MOINES, IOWA
515 267-0300
1700 50TH ST. WEST DES MOINES, IA, 50266
West Des Moines, IA
 
Lowe's of Jordan Creek
515-440-9940
450 South Jordan Creek Parkway West DesMoines, IA, 50266
West Desmoines, IA
 

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker