American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drill Press Cabinet Westborough MA

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

Village Lumber&true Value Hdw.
(508) 366-8222
1 Phillips St
Westborough, MA
 
Lowe's
(508) 282-4016
40 Fortune Boulevard
Milford, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Monnick Supply
(508) 624-7070
222a East Main Street
Marlborough, MA
 
Rays True Value Hardware
(508) 865-9037
22 Howe Ave
Millbury, MA
 
Holliston True Value
(508) 429-4404
58 Central St
Holliston, MA
 
Lowe's
(508) 614-1152
260-266 Turnpike Road
Westborough, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Marlborough - A
(508) 357-6200
521 Lynch Blvd
Marlborough, MA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5

Grafton Square True Value Hdwe
(508) 754-0044
113 Hamilton St
Worcester, MA
 
Lowe's
(508) 595-1450
533 Lincoln Street
Worcester, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Lowe's
(978) 568-3300
6 Highland Common East
Hudson, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Drill Press Cabinet

Drill Press Cabinet

 

In my cramped little shop, every square foot counts. With that inmind, I designed this cabinet to fit in the wasted space under thetable of my floor-model drill press. The top drawer holds (vertically)all the twist bits and brad-point bits a person could ever accumulate,and the lower drawers hold sanding drums, spade bits (horizontally),plug cutters and all the rest of the drill press paraphernalia. If youever need to drill into something 4-ft. thick, the cabinet slides outeasily.

An important feature of this cabinet is that the drawers haveextra-long 3/4-extension slides to provide full-extension (see Sources,below). I sized my cabinet to fit my Delta 17-in. drill press, model17-900 and made it all from birch plywood.

To build the cabinet, cut all the parts, including the cutout in thetop. Then screw and glue the inner braces and the back (Parts A and B).Screw on the sides (C), then attach the drawer slides (see Hardware,below) and the top. Nail and glue together the drawer boxes (E and F),then nail on the bottoms (G) to square them up. Attach the slides andinstall the drawers in the cabinet. Using double-faced tape, attach thedrawer fronts (H) so there is a uniform gap all around. Screw on thedrawer fronts and attach the drawer pulls (see Sources). Build and fitthe Bit rack (J). Attach the toe kick (K) and bingo, you've got storagespace. 

 

Click here to read the rest of the article from American Woodworker