American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Drum Sanders North Pole AK

This page provides relevant content and local businesses that can help with your search for information on Drum Sanders. You will find informative articles about Drum Sanders, including "Mini Drum Sander". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in North Pole, AK that can help answer your questions about Drum Sanders.

Denali Industrial Supply Inc
907-452-4524
2800 Cushman St Fairbanks, AK, 99701
Fairbanks, AK
 
Fastenal- Fairbanks
907-455-8600
3580 Cartwright Ct Unit A Fairbanks, AK, 99701
Fairbanks, AK
 
Fastenal- Anchorage
907-561-3700
601 E. International Airport Rd Anchorage, AK, 99518
Anchorage, AK
 
Spenard Builders Supply- Eagle River
907-694-3527
17320 Northgate Park Eagle River, AK, 99577
Eagle River, AK
 
Alaska Industrial Hardware- Anchorage
907-561-1781
4700 Old Seward Hwy Anchorage, AK, 99503
Anchorage, AK
 
Spenard Builders Supply- Fairbanks
907-450-2200
2460 Phillips Field Road Fairbanks, AK, 99701
Fairbanks, AK
 
LOWE'S OF ANCHORAGE, AK
907 563-0391
333 EAST TUDOR ROAD ANCHORAGE, AK, 99503
Anchorage, AK
 
Spenard Builders Supply- Anchorage
907-261-9380
10010 Old Seward Hwy Anchorage, AK, 99515
Anchorage, AK
 
Spenard Builders Supply- Wasilla
907-373-2806
2501 E Bogard Road Wasilla, AK, 99654
Wasilla, AK
 
Spenards Builder Supply
(907) 563-3141
4412 Lois Drive Anchorage, AK, 99517
Anchorage, AK
 

Mini Drum Sander



No two ways about it, sanding stinks! A drum sander can eliminate the drudgery, but not everyone has room in their budget, or their shop, for a huge expensive machine. The new 10-20 Plus Drum Sander from Performax ($500) is less expensive and takes up less space than other drum sanders. The 10-in.-long drum is open on the end. You can actually sand stuff up to 20-in. wide by doing it in two passes. It handles pieces from 1/32- to 2-1/2-in. thick, and as short as 2-1/4 in. The machine is powered by a 120-volt 3/4-hp motor. You must use a dust collector with any drum sander, and this one requires a collector that pulls at least 400 cfm. At 85 lbs., this machine is no lightweight. But if you don't mind lifting or sliding this sander around, you can bring it out as needed and store it when you're done.

Sources:
Performax, (800) 274-6848, www.wmhtoolgroup.com, 10-20 Plus Drum Sander, #628900, $500; Stand, #608004, $90.

...

Click here to read the rest of the article from American Woodworker