American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Drum Sanders Provo UT

This page provides relevant content and local businesses that can help with your search for information on Drum Sanders. You will find informative articles about Drum Sanders, including "Mini Drum Sander". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Provo, UT that can help answer your questions about Drum Sanders.

LOWE'S OF OREM, UT.
801 229-1485
140 WEST UNIVERSITY PARKWAY OREM, UT, 84058
Orem, UT
 
Timberline Woodworkers Supply
801-224-2260
1402 W Center Street Orem, UT, 84057
Orem, UT
 
TRANSWEST
(801) 225-8986
1590 W CENTER STREET, UNIT A OREM, UT, 84057
Orem, UT
 
White Cap- Orem
801-765-1440
555 South 1325 W Orem, UT, 84058
Orem, UT
 
CONNECTORS FOR CONSTRUCTION
(801) 627-8156
2008 W. 2550 S West Haven, UT, 84401
West Haven, UT
 
White Cap- Orem
801-765-1440
555 South 1325 W Orem, UT, 84058
Orem, UT
 
WASATCH BUILDING SUPPLY
(801) 798-9072
1049 N 140 E OREM, UT, 84057
Orem, UT
 
Lowe's of Lehi
801-768-6020
242 North 1200 East Lehi, UT, 84043
Lehi, UT
 
Lowe's of Lehi
801-768-6020
242 North 1200 East Lehi, UT, 84043
Lehi, UT
 
Air O Fasteners/Salt Lake City
(801) 483-1515
2290 S. West Temple Salt Lake City, UT, 84115
Salt Lake City, UT
 

Mini Drum Sander



No two ways about it, sanding stinks! A drum sander can eliminate the drudgery, but not everyone has room in their budget, or their shop, for a huge expensive machine. The new 10-20 Plus Drum Sander from Performax ($500) is less expensive and takes up less space than other drum sanders. The 10-in.-long drum is open on the end. You can actually sand stuff up to 20-in. wide by doing it in two passes. It handles pieces from 1/32- to 2-1/2-in. thick, and as short as 2-1/4 in. The machine is powered by a 120-volt 3/4-hp motor. You must use a dust collector with any drum sander, and this one requires a collector that pulls at least 400 cfm. At 85 lbs., this machine is no lightweight. But if you don't mind lifting or sliding this sander around, you can bring it out as needed and store it when you're done.

Sources:
Performax, (800) 274-6848, www.wmhtoolgroup.com, 10-20 Plus Drum Sander, #628900, $500; Stand, #608004, $90.

...

Click here to read the rest of the article from American Woodworker