American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Float Through Your Routing Tasks Fergus Falls MN

With the cutter alone providing resistance, the job of controlling the router is made easier with the Air-Glide. We tried the base on edge cuts (above) to see how the base performed when over half the air jet holes are hanging in thin air.

The Home Depot
(218)736-4234
2025 Lincoln Avenue West
Fergus Falls, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Fergus Falls-Auth Hometown
(218) 736-5404
211 W Lincoln Ave
Fergus Falls, MN
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8.5-17.5
Tue:8.5-17.5
Wed:8.5-17.5
Thu:8.5-17.5
Fri:8.5-17.5
Sat:8-17
Sun:11-15
Store Features
Mon:8.5-17.5
Tue:8.5-17.5
Wed:8.5-17.5
Thu:8.5-17.5
Fri:8.5-17.5
Sat:8-17
Sun:11-15

Everts Do it Best Lumber
(218) 864-5983
205 Lake Ave South
Battle Lake, MN
 
The Home Depot
(218)759-4007
2425 Middle School Dr NW
Bemidji, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(507)377-9891
2400 Consul Street
Albert Lea, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Fastenal- Fergus Falls
218-736-2220
504 South Concord Fergus Falls, MN, 56537
Fergus Falls, MN
 
Kmart 9537 / Cross Merch
(218) 739-4454
1403 W Lincoln Ave
Fergus Falls, MN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Ashby Hardware Hank
(218) 747-2869
102 Melby Ave
Ashby, MN

Data Provided by:
The Home Depot
(320)252-3262
401 2nd Street South
Waite Park, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(507)385-7990
375 St Andrews Dr
Mankato, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Float Through Your Routing Tasks

Float Through Your Routing Tasks

 

    

If you've ever played a game of air hockey, you'll appreciate how a router might feel floating on a cushion of air. The Betterley Air-Glide Router Base mounts onto most routers in minutes. Even big 3-hp routers glide with ease. Surface scratches are now a thing of the past. With the cutter alone providing resistance, the job of controlling the router is made easier with the Air-Glide.
We tried the base on edge cuts (above) to see how the base performed when over half the air jet holes are hanging in thin air. There's still plenty of lift and the router slid with ease. Additional subbases are available with different bit hole diameters including one sized for Porter-Cable template guides. There's even a square subbase with an offset hole that gives you three dimensional steps, 1/8-in., 1/16-in.  and 1/32-in. from different edges. This allows you to make your initial cut followed by a slight clean-up pass simply by rotating the router. Note: At a minimum, you need a  5CFM @90 psi compressor for the Air-Glide to keep  your router afloat.

Sources
Betterley Industries, Inc., www.betterleytools.com, (800) 871-7516, Air-Glide Router Base, $150;  Round Sub-Base, $29; Square Sub-Base, $49.

Click here to read the rest of the article from American Woodworker