American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Float Through Your Routing Tasks Wallingford CT

With the cutter alone providing resistance, the job of controlling the router is made easier with the Air-Glide. We tried the base on edge cuts (above) to see how the base performed when over half the air jet holes are hanging in thin air.

The Home Depot
(203)269-1211
1055 N Colony Rd
Wallingford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Naugatuck Valley Hardwoods
(203) 758-7222
Prospect, CT

Data Provided by:
The Home Depot
(860)346-3007
909 Washington Street
Middletown, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)828-9440
225 Berlin Turnpike
Berlin, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Wood Rack
(203) 481-4505
40 North East Industrial Road
Branford, CT

Data Provided by:
The Home Depot
(203)234-1300
111 Universal Drive N
North Haven, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(203)248-5925
1873 Dixwell Avenue
Hamden, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)621-6770
89 Interstate Park Drive
Southington, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(203)467-2001
75 North Frontage Road
East Haven, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(203)734-1371
117 Main Street
Derby, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Float Through Your Routing Tasks

Float Through Your Routing Tasks

 

    

If you've ever played a game of air hockey, you'll appreciate how a router might feel floating on a cushion of air. The Betterley Air-Glide Router Base mounts onto most routers in minutes. Even big 3-hp routers glide with ease. Surface scratches are now a thing of the past. With the cutter alone providing resistance, the job of controlling the router is made easier with the Air-Glide.
We tried the base on edge cuts (above) to see how the base performed when over half the air jet holes are hanging in thin air. There's still plenty of lift and the router slid with ease. Additional subbases are available with different bit hole diameters including one sized for Porter-Cable template guides. There's even a square subbase with an offset hole that gives you three dimensional steps, 1/8-in., 1/16-in.  and 1/32-in. from different edges. This allows you to make your initial cut followed by a slight clean-up pass simply by rotating the router. Note: At a minimum, you need a  5CFM @90 psi compressor for the Air-Glide to keep  your router afloat.

Sources
Betterley Industries, Inc., www.betterleytools.com, (800) 871-7516, Air-Glide Router Base, $150;  Round Sub-Base, $29; Square Sub-Base, $49.

Click here to read the rest of the article from American Woodworker