American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Fold-Down Cutting Rack Dawsonville GA

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget.

The Home Depot
(706)531-0046
801 Hwy 400 South
Dawsonville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)888-8135
1000 Market Pl Blvd
Cumming, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)532-7395
924 Dawsonville Hwy
Gainesville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Dawsonville - Auth Hometown
(706) 265-1883
276 Hwy 400 North
Dawsonville, GA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9.5-18.5
Sun:11-16
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9.5-18.5
Sun:11-16

Wood Ace Hardware
(770) 887-2225
2000 Canton Hwy, Canton Hwy, just past Bethelview
Cumming, GA
 
The Home Depot
(706)867-9618
140 Maxwell Lane
Dahlonega, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)965-7877
5851 Spout Springs Rd
Flowery Branch, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)831-5005
4120 Highway 20
Buford, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Dawsonville
706-265-1278
30 Industrial Park Rd Suite 105 Dawsonville, GA, 30534
Dawsonville, GA
 
Kentec Megatools- Cumming
678-965-6797
3670 Hutchison Road, Suite D Cumming, GA, 30040
Cumming, GA
 

Fold-Down Cutting Rack

Fold-Down Cutting Rack

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget. Then I came up with the solution: a lightweight, fold-down rack that stores up and out of the way on my shop ceiling.

When I’ve got sheet stock to cut, I fold down the rack and set the plywood on support blocks. Then I clamp on a straightedge as a saw guide. With my circular saw blade set to cut 1/8 in. deeper than the stock, I’m ready to go. For narrower sheets, I use the flip-out blocks in the middle of the rack. 

The lightweight rack swings up for easy storage. A single 2x4 catch temporarily holds the rack in place. Two lengths of chain and a hook safely secure the rack over head. 

Click here to read the rest of the article from American Woodworker