American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Fold-Down Cutting Rack Gallup NM

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget.

The Home Depot
(505)726-2362
530 Kachina Street
Gallup, NM
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

Gallup Lumber & Ace Hardware
(505) 863-4475
1724 S 2nd St, Corner of Second Street & Nizhoni
Gallup, NM
 
The Home Depot
(575)443-8018
3400 N White Sand Blvd
Alamogordo, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)271-1900
200 Eubank Blvd SE
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(505)899-1290
10200 Coors Dr NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Gallup - Auth Hometown
(505) 863-9336
901 Metro Ave
Gallup, NM
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:12-17

Woodcraft - Albuquerque, NM
(505) 342-9663
4520B Alexander NE
Albuquerque, NM

Data Provided by:
The Home Depot
(575)492-9117
900 W Joe Harvey Blvd
Hobbs, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)726-2362
530 Kachina Street
Gallup, NM
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(505)327-0710
3560 E Main Street
Farmington, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Fold-Down Cutting Rack

Fold-Down Cutting Rack

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget. Then I came up with the solution: a lightweight, fold-down rack that stores up and out of the way on my shop ceiling.

When I’ve got sheet stock to cut, I fold down the rack and set the plywood on support blocks. Then I clamp on a straightedge as a saw guide. With my circular saw blade set to cut 1/8 in. deeper than the stock, I’m ready to go. For narrower sheets, I use the flip-out blocks in the middle of the rack. 

The lightweight rack swings up for easy storage. A single 2x4 catch temporarily holds the rack in place. Two lengths of chain and a hook safely secure the rack over head. 

Click here to read the rest of the article from American Woodworker