American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Fold-Down Cutting Rack Madison OH

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget.

The Home Depot
(440)357-0428
9615 Diamond Center Dr
Mentor, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(440)285-7400
287 Meadowlands Drive
Chardon, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Madison - Auth Hometown
(440) 428-7327
6656 N Ridge Road
Madison, OH
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16

Central Ace Hardware
(440) 466-3928
44 S Broadway, Center of Historic Downtown Geneva
Geneva, OH
 
Joughin Hardware
(440) 357-5862
23 South State Street
Painesville, OH
 
The Home Depot
(440)992-7797
3200 Market Place St
Ashtabula, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Western Reserve Hardware Store
(440) 428-2950
6455 North Ridge Rd
Madison, OH
 
Valley Bldg.ctr.of Andover,inc
(440) 466-5995
1977 South Broadway
Geneva, OH
 
Crile Road Hardware
(440) 352-3761
7701 Crile Road
Painesville, OH
 
Kmart 4910 / Cross Merch
(440) 974-7300
9200 Mentor Ave
Mentor, OH
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

Fold-Down Cutting Rack

Fold-Down Cutting Rack

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget. Then I came up with the solution: a lightweight, fold-down rack that stores up and out of the way on my shop ceiling.

When I’ve got sheet stock to cut, I fold down the rack and set the plywood on support blocks. Then I clamp on a straightedge as a saw guide. With my circular saw blade set to cut 1/8 in. deeper than the stock, I’m ready to go. For narrower sheets, I use the flip-out blocks in the middle of the rack. 

The lightweight rack swings up for easy storage. A single 2x4 catch temporarily holds the rack in place. Two lengths of chain and a hook safely secure the rack over head. 

Click here to read the rest of the article from American Woodworker