American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Fold-Down Cutting Rack Park City UT

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget.

The Home Depot
(435)649-1467
1595 East Frontage Rd
Park City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)461-4248
3398 S Highland Drive
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hdw at Olympus Hills
(801) 424-1414
3939 Wasatch Blvd
Salt Lake City, UT
 
Ace Hardware Lone Peak
(801) 763-2221
5353 W PARKWAY EAST ST
Highland, UT
 
The Home Depot
(801)567-0700
1310 E Park Centre Dr
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)763-8640
885 W Grassland Drive
American Fork, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Mortimer Lumber
810-987-3020
2307 Lapeer Ave Port Huron, MI, 84060
Port Huron, MI
 
Kmart 4159 / Cross Merch
(801) 266-4437
4670 S 900 East
Salt Lake Cit, UT
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Fashion Place Mall
(801) 268-5052
6191 S State St Ste 300
Murray, UT
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-18

Fold-Down Cutting Rack

Fold-Down Cutting Rack

There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. What a hassle. I wanted my own panel saw, but I knew there was simply no room in my shop or budget. Then I came up with the solution: a lightweight, fold-down rack that stores up and out of the way on my shop ceiling.

When I’ve got sheet stock to cut, I fold down the rack and set the plywood on support blocks. Then I clamp on a straightedge as a saw guide. With my circular saw blade set to cut 1/8 in. deeper than the stock, I’m ready to go. For narrower sheets, I use the flip-out blocks in the middle of the rack. 

The lightweight rack swings up for easy storage. A single 2x4 catch temporarily holds the rack in place. Two lengths of chain and a hook safely secure the rack over head. 

Click here to read the rest of the article from American Woodworker