American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Full-Storage Workbench Kailua Kona HI

Tired of working on a sheet of plywood thrown over a pair of sawhorses? Had it with rolling benches that wiggle and wobble? Hate running around your shop whenever you need a tool? Boy, do we have the bench for you. Our dream bench starts with traditional workbench features like a thick top, a sturdy base, bench dogs and a pair of vises.

The Home Depot
(808)326-6013
73-5598 Olowalu St
Kailua Kona, HI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-6:00pm

LOWE'S OF KONA, HI
808 331-3470
75-5677 HALE KAPILI STREET KAILUA KONA, HI, 96740
Kailua Kona, HI
 
ABC Supply Co.,Inc/Kailua Kona
808-327-0445
73-4939 Kamanu St. Kailua Kona, HI, 96740
Kailua Kona, HI
 
HPM Building Supply
(808) 329-1634
74-5511 Luhia St
Kailua Kona, HI
 
Fastenal- Lailua Kona
808-329-7092
73-5569 Maiau St #105 & #106 Kailua Kona, HI, 96740
Kailua Kona, HI
 
Kmart 7683 / Cross Merch
(808) 326-2331
74-5465 Kamaka'Eha Ave
Kailua-Kona, HI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

HPM Bldg Sply/Kailua-Kona
74-5511 Luhia Street Kailua-Kona, HI, 96740
Kailua-Kona, HI
 
Kona Ace Hdwe & Crafts
(808) 329-2981
74-5500 Kaiwi St
Kailua Kona, HI
 
Lowe's
(808) 331-3470
75-5677 Hale Kapili Street
Kailua Kona, HI
Hours
M-SA 6 am - 9 pm
SU 7 am - 8 pm

CAPTAIN COOK ACE HARDWARE
(808) 323-2655
KEALAKEKUA RANCH CENTER
CAPTAIN COOK, HI
 

Full-Storage Workbench

Full-Storage Workbench


Tired of working on a sheet of plywood thrown over a pair of sawhorses? Had it with rolling benches that wiggle and wobble? Hate running around your shop whenever you need a tool? Boy, do we have the bench for you. Our dream bench starts with traditional workbench features like a thick top, a sturdy base, bench dogs and a pair of vises. Then we added tons of storage, an extra-wide top, and modern, cast-iron vises. Last but not least, we devised a simple method to make the bench mobile and still provide a rock-solid work platform. Our bench is built to withstand generations of heavy use. Simple, stout construction absorbs vibration and can handle any woodworking procedure from chopping deep pocket mortises to routing an edge on a round tabletop. The thick, butcher-block-style top is truly a joy to work on. We'll show you how to surface this huge top without going insane trying to level 24 separate strips of glued-up hardwood. Our top doesn't wastewood—even the off cuts are used.

Benefits:

Tons of easy-access storage:
Full extension drawers and shelves keep your equipment organized and right at hand. There's room for hand tools, power tools and all of their accessories. Plus no bending down and fishing through dark cabinet interiors for the tool you need. 

Extra-wide, heavy-duty top:
This solid maple top can take a real beating. Plus it's wide enough to double as an assembly table. If you only have room for one bench in your shop, this is it.

You name it, this bench can clamp it down:
A traditional bench dog system secures your work for machining and sanding. The modern cast-iron vises are strong yet easier to install than traditional vises. The generous overhanging top allows you to clamp anything from round tabletops to bench top machines anywhere along the edge.

It's rock-solid but mobile:
Under the base cabinet are six heavy-duty casters that make the bench easy to move. When you'reready to use it, lift the edge of the bench with a pry bar and slip four 5/8-in.-thick, L-shaped support blocks underneath. This gives you a rock-solid feel and unlike locking casters, there's no wobble or slippage.

PHOTO 1:
Start the base cabinet by assemblingthree identical boxes with butt joints and screws. Make sure all the parts are square and the joints are flush. Use a flat area, like the top of your tablesaw, to help keep things in line.

PHOTO 2:
Screw the three boxes together to create the cabinet base. Use clamps to hold the boxes flush and even.

PHOTO 3:
Glue and clamp face frames to
the cabinet. Start with the side frames. Then add the front face frameso it overhangs the bottom of the cabinet to form a lip for the 2x4base you'll build later.

PHOTO 4:
Trim the face frame flush to the cabinet sides. Use a stop block at the top of the cabinet ope...

Click here to read the rest of the article from American Woodworker