Goof-Proof Crown Molding Bridgeton NJ
M-SA 6 am - 10 pm
SU 8 am - 8 pm
Mullica Hill, NJ
Goof-Proof Crown Molding
Goof-Proof Crown Molding
By Tom Caspar
Cutting perfect miters on crown molding can be a real challenge. Make a mistake and a lot of expensive wood goes to waste. This method, which uses a shop-made miter box, puts the molding in its “natural” position, the way it will be placed on your project. It’s easy to set up the saw and tweak the miter’s angle for inside and outside joints. The saw’s blade stays at 90 degrees to the table, so you don’t have any complicated compound cuts to set up.
Start by building the miter box (see photo, below). Don’t use screws; you don’t want to accidentally cut into one. Use a combination square to figure out how wide the box’s pieces must be to hold the molding in its natural, upright position. The bottom piece’s width equals the molding’s depth when it’s installed. The side pieces’ width equals the molding’s height when it’s installed plus the thickness of the bottom piece. Cut these pieces about 12 in. long and leave the ends square for now. Glue the box together; then miter the ends. Label each corner.
Cutting miters is very straightforward (see photos, right). For convenience, I always hold the box on the saw’s left side. For the best results, screw the box to the miter saw’s fence. For some cuts, the box’s long side goes against the fence. For others, the short side goes against the fence. Using a high-tooth count blade will produce a very smooth cut, with no tearout on the molding’s face.
This method won’t work on all saws and all crown moldings. Success depends on the molding’s height and the saw’s capacity. Many tall moldings can be cut this way using a 12-in. saw, but a 10-in. saw may not have adequate clearance.
Build the miter box from three pieces of plywood. Label the corners to indicate how the crown molding is oriented for each miter cut.
Place the molding’s top edge against the label identifying the cut and you can’t go wrong.
This story originally appeared in American Woodworker Dec/Jan 2007, issue #126.
Source information may have changed since the original publication date.
Dec/Jan 2007, issue #126
Purchase this back issue.
Philadelphia Flower Show 2018
Dates: 3/4/2018 – 3/11/2018
Pennsylvania Convention Center Philadelphia
1101 Arch Street
The Philadelphia Flower Show, internationally recognized as one of the nation's premiere events as well as the oldest and largest indoor show of its kind, is produced by the Pennsylvania Horticultural Society. PHS has more than 15,000 members throughout the country, offers hundreds of educational programs year-round, and is considered the nationâ�TMs leading authority on urban renewal through greening. PHS's acclaimed Philadelphia Green program restores neighborhood parks, creates community gardens, conducts large scale tree plantings, revitalizes vacant land, engages thousands of citizens in community development activities and maintains treasured public landscapes. Its greening efforts are modeled in many cities across the country.Not sure if you want to exhibit at or attend the Philadelphia Flower Show 2018? See the panels below to get the information you need to make an informed decision.All information in Events In America is deemed to be accurate at the time we add it,and we take steps to verify all details and update our records when new information is provided, but as people, events and circumstances change, we caution users to independently confirm all information. EventsInAmerica.com and Events In America LLC make no guarantee of accuracy and assume no liability for inaccurate information.