American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Grizzly Jointer/Planer Middletown RI

Put together a 12-in. planer and a 12-in. jointer and what have you got? A two-in-one combination machine that's perfect for a small shop. European woodworkers have long been enthusiastic about these compact machines, but they haven't made much of an inroad in the U.S. Grizzly is about to change that, for two reasons: low price and a spiral carbide-insert cutterhead.

The Home Depot
(401)845-5092
878 W Main Road
Middletown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
The Home Depot
(401)823-5173
700 Centre Of N E Blvd
Coventry, RI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

One Stop Bldg Sply Ctr
(401) 847-8460
236 Connell Hwy
Newport, RI
 
St. Angelo Hardwoods, Inc. - Genuine Asian Teak Specialist
(401) 624-3900
490 Eagleville Road
Tiverton, RI

Data Provided by:
Good Wood
(508) 344-7888
1025 Drift Rd
Westport, MA

Data Provided by:
Liberty Cedar, Inc.
(401) 789-6626
325 Liberty Lane
West Kingston, RI

Data Provided by:
Handren's Paint & Hardware
(401) 293-5290
3001 East Main Road
Portsmouth, RI
 
Jamestown True Value
(401) 423-2722
5 Narragansett Ave
Jamestown, RI
 
Data Provided by:

Grizzly Jointer/Planer

Grizzly Jointer/Planer

 

    

Put together a 12-in. planer and a 12-in. jointer and what have you got? A two-in-one combination machine that's perfect for a small shop. European woodworkers have long been enthusiastic about these compact machines, but they haven't made much of an inroad in the U.S. Grizzly is about to change that, for two reasons: low price and a spiral carbide-insert cutterhead. A spiral cutterhead can produce an incredibly smooth surface in the toughest woods. Best of all, it doesn't take forever to change knives. When they get dull, you just rotate all of the small, square knives one-quarter turn. If one gets nicked, you loosen it and turn it. The G0634 comes with a 5-hp motor and sells for $2,295. (A less expensive version, the G0633, has a standard 3-knife cutterhead and sells for $1,795.) It weighs 672 lbs., which means it contains plenty of cast iron to cut down on vibration. The jointer's bed is 59-1/2 in. long. It's fence is quite tall, at 5-7/8 in. high. This powerful planer can make a 12-in. wide cut, 1/8-in. deep. The 220-volt motor requires a 30-amp breaker.

Source
Grizzly Industrial, www.grizzly.com (800) 523-4777, Jointer/Planer Combination Machines, G0633, $1,795; G0634, $2,295.

Click here to read the rest of the article from American Woodworker