American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Grizzly Jointer/Planer Roswell NM

Put together a 12-in. planer and a 12-in. jointer and what have you got? A two-in-one combination machine that's perfect for a small shop. European woodworkers have long been enthusiastic about these compact machines, but they haven't made much of an inroad in the U.S. Grizzly is about to change that, for two reasons: low price and a spiral carbide-insert cutterhead.

The Home Depot
(575)622-2026
2350 N Main
Roswell, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Roswell Lumber Do it center
(575) 622-7841
200 S Main
Roswell, NM
 
Broadmoor Ctr
(575) 622-1310
1000 S Main St
Roswell, NM
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-18
Tue:9.5-18
Wed:9.5-18
Thu:9.5-18
Fri:9.5-18
Sat:9.5-18
Sun:12-18
Store Features
Mon:9.5-18
Tue:9.5-18
Wed:9.5-18
Thu:9.5-18
Fri:9.5-18
Sat:9.5-18
Sun:12-18

The Home Depot
(505)865-0425
1800 Main Street NW
Los Lunas, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)344-1900
1220 Renaissance Blvd NE
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Kmart 7017 / Cross Merch
(505) 623-7480
1705 S Main St
Roswell, NM
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Westlake Ace Hardware
(575) 624-0550
2810 D N Main St
Roswell, NM
 
The Home Depot
(505)327-0710
3560 E Main Street
Farmington, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(575)443-8018
3400 N White Sand Blvd
Alamogordo, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Home Depot
(505) 424-9463
952 Richards Ave
Santa Fe, NM
 

Grizzly Jointer/Planer

Grizzly Jointer/Planer

 

    

Put together a 12-in. planer and a 12-in. jointer and what have you got? A two-in-one combination machine that's perfect for a small shop. European woodworkers have long been enthusiastic about these compact machines, but they haven't made much of an inroad in the U.S. Grizzly is about to change that, for two reasons: low price and a spiral carbide-insert cutterhead. A spiral cutterhead can produce an incredibly smooth surface in the toughest woods. Best of all, it doesn't take forever to change knives. When they get dull, you just rotate all of the small, square knives one-quarter turn. If one gets nicked, you loosen it and turn it. The G0634 comes with a 5-hp motor and sells for $2,295. (A less expensive version, the G0633, has a standard 3-knife cutterhead and sells for $1,795.) It weighs 672 lbs., which means it contains plenty of cast iron to cut down on vibration. The jointer's bed is 59-1/2 in. long. It's fence is quite tall, at 5-7/8 in. high. This powerful planer can make a 12-in. wide cut, 1/8-in. deep. The 220-volt motor requires a 30-amp breaker.

Source
Grizzly Industrial, www.grizzly.com (800) 523-4777, Jointer/Planer Combination Machines, G0633, $1,795; G0634, $2,295.

Click here to read the rest of the article from American Woodworker