American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Hand Sanding Blocks Bennington VT

Isaac Fischer, Jr., of Springfield, Vt., patented sandpaper on June 14, 1834. Shortly after that, presumably, sanding blocks were invented. Sanding blocks apply even pressure over the entire surface of the paper. This makes sanding by hand faster and more efficient.

The Home Depot
(802)447-9997
121 N Bennington Rd
Bennington, VT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

H. Greenberg & Son Inc.
(802) 442-3131
321 Main Street
Bennington, VT
 
Carr Hardware True Value
(413) 663-6600
192 State Street
North Adams, MA
 
Deerfield Valley Supply
(802) 464-3364
211 Route 9 W
Wilmington, VT
 
Miles True Value Lbr.
(802) 375-2525
178 Chittenden Dr
Arlington, VT
 
H. Greenberg and Son
802-442-3131
321 Main St. Bennington, VT, 05201
Bennington, VT
 
Hoosick True Value Hardware
(518) 686-7238
21953 Ny 22
Hoosick Falls, NY
 
W W Building Supply
(802) 464-3022
Route 100
Wilmington, VT
 
H. Greenberg & Son Inc
(413) 664-4576
1366 Curran Highway
North Adams, MA
 
Stanleys Lumber & Building Supplies
(413) 743-0831
20 N Summer St
Adams, MA
 

Hand Sanding Blocks

Hand Sanding Blocks



Isaac Fischer, Jr., of Springfield, Vt., patented sandpaper on June 14, 1834. Shortly after that, presumably, sanding blocks were invented. Sanding blocks apply even pressure over the entire surface of the paper. This makes sanding by hand faster and more efficient. Today, power sanders take a lot of the time and drudgery out of sanding. Even so, nearly every project benefits from a little hand sanding. I power-sand as much as possible, of course, but I always finish with hand sanding to remove the tiny cross-grain scratches that power sanders leave behind. This little bit of hand sanding is one secret to a good finish. Hand sanding is also a must on molding profiles or any detail that a power sander either can't reach or would ruin. I've tried every commercial sanding block I could get my hands on. In the end, I've found several blocks that I'd recommend for any shop. I use two very basic criteria for making my picks. First, the block should be comfortable. This keeps fatigue to a minimum during big sanding jobs. Second, changing grits should be quick, occur easily and waste little or no precious paper. Sanding blocks fall into four categories based on the paper each holds: plain-paper, pressure-sensitive-adhesive or hook-and-loop, sanding belt and specialized blocks for specific sanding chores.

Plain-Paper Sanding Blocks
The best thing about these blocks is that they use ordinary sheet paper that costs a lot less than belts or self-stick pressure-sensitive-adhesive or hook-and-loop paper. They also allow you to use specialized paper, like wet-dry paper, that's available only in plain-backed paper. They require cutting the full sheets of sand-paper into one-half, one-quarter, one-third or one-sixth sheets, which can be a bit of a pain. I prefer the quarter-sheet blocks. That size fits nicely in the hand and it's easy to divide the paper into quarters.



Recommendation

The Preppin' Weapon ($20) is well-designed and made in the United States of durable, high-impact ABS plastic. The contoured shape is comfortable whether you're sanding one-handed or bearing down with two. Easy-to-use lever-action clips make paper changes a snap. The clips use very little sandpaper to grip and they pull the paper tight. Plus, the block can hold as many as four sheets of abrasive at once. Just tear off each sheet as it wears out. Other features I like include tapered edges that allow the block to get right into corners and a tough rubber pad that's firm, not mushy. The Preppin' Weapon is designed for either wet or dry use. Its styrofoam core keeps the block floating in a bucket of water and the stainless steel clip mechanism will never corrode.

Source
Time-Shaver Tools Inc., (877) 763-3729, www.timeshavertools.com, Preppin' Weapon, available in red, yellow, green and blue, 2-3/4 x 7-3/4 in., $20 plus $3.50 shipping.



Pressure-Sensitive-Adhesive or Hook-and-Loop Blocks and Pads...

Click here to read the rest of the article from American Woodworker