American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Heavy Lathe with Extra Capacity Brigham City UT

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

The Home Depot
(801)393-0106
984 Wall Avenue
Ogden, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hardware
(435) 257-5034
250 E Main St
Tremonton, UT
 
Lowe's of Ogden, UT
801-398-5460
344 N Washington Boulevard Ogden, UT, 84404
Ogden, UT
 
Wangsgards
(801) 393-8423
120 N Washington Blvd, 5 points in Ogden
Ogden, UT
 
The Home Depot
(801)543-2296
449 N. Main St
Layton, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Greer's Do it Best Hardware
(435) 257-7749
28 West Main Street
Tremonton, UT
 
Smith & Edwards Co Inc
(801) 731-1120
3936 N Highway 126, exit 351 off I-15
Ogden, UT
 
Lowe's
(801) 398-5460
344 N. Washington Boulevard
Ogden, UT
Hours
M-SA 6 am - 10 pm
SU 8 am - 9 pm

The Home Depot
(435)627-0100
725 W Telegraph St
Washington, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

MacBeath Hardwood Company
(801) 484-7616
1576 So. 300 West
Salt Lake City, UT

Data Provided by:
Data Provided by:

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker