American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Heavy Lathe with Extra Capacity Fremont NE

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

The Home Depot
(402)964-9700
3950 North 144th St
Omaha, NE
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fremont - Auth Hometown
(402) 727-5225
1690 E 23Rd St
Fremont, NE
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

Christensen Lumber Inc
(402) 721-3212
714 S Main St
Fremont, NE
 
Wahoo Do it Best Building Ctr
(402) 443-3424
205 West 5th Street
Wahoo, NE
 
Reyzlik Ace Hardware
(402) 426-3322
1704 Washington St
Blair, NE
 
Fastenal- Fremont
402-727-7288
1684 East 23rd Avenue North Fremont, NE, 68025
Fremont, NE
 
Fremont Ace Hardware & Garden Ctr
(402) 727-7067
1660 E 23rd St
Fremont, NE
 
North Bend Do it Best
(402) 652-3405
430 E 6th Street
North Bend, NE
 
Elkhorn Ace Hardware Inc
(402) 289-2333
20277 Wirt St
Elkhorn, NE
 
Lowe's
(402) 492-1200
3333 N. 147Th Street
Omaha, NE
Hours
M-SA 7 am - 10 pm
SU 8 am - 8 pm

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker