American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Heavy Lathe with Extra Capacity Orem UT

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

The Home Depot
(801)226-2353
535 S Lindon Park Dr
Lindon, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)763-8640
885 W Grassland Drive
American Fork, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Timberline Woodworkers Supply
801-224-2260
1402 W Center Street Orem, UT, 84057
Orem, UT
 
WASATCH BUILDING SUPPLY
(801) 798-9072
1049 N 140 E OREM, UT, 84057
Orem, UT
 
Parley's Do it Best Hardware
(801) 822-5200
260 South 1200 West
Orem, UT
 
The Home Depot
(801)418-1014
1550 S University Ave
Provo, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

TRANSWEST
(801) 225-8986
1590 W CENTER STREET, UNIT A OREM, UT, 84057
Orem, UT
 
Kmart 3096 / Cross Merch
(801) 224-0234
475 N State St
Orem, UT
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

LOWE'S OF OREM, UT.
801 229-1485
140 WEST UNIVERSITY PARKWAY OREM, UT, 84058
Orem, UT
 

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker