American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Heavy Lathe with Extra Capacity Springfield MO

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

The Home Depot
(417)881-7277
2104 E Independence
Springfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Herrman Lumber Co - Springfield
(417) 862-2800
1917 S State Hwy Mm
Springfield, MO
 
KEL WELCO DISTRIBUTING/Springfield
(417) 832-8837
423 N Belcrest Ave Springfield, MO, 65802
Springfield, MO
 
Meeks The Builders Choice
(417) 862-6487
2741 S Scenic
Springfield, MO
 
Cowan's Ace Hdw
(417) 869-2912
3310 W College Ave, Corner of West Bypass and Chestnut Expressway
Springfield, MO
 
White Cap- Springfield
417-832-8837
423 North Belcrest Avenue Springfield, MO, 65802
Springfield, MO
 
Springfield True Value
(417) 886-4171
4121 South Cox
Springfield, MO
 
H K & W INC
(417) 869-4527
610 W CHESTNUT ST SPRINGFIELD, MO, 65806
Springfield, MO
 
BALLEW SAW & TOOL
(417) 865-7511
325 S Kimbrough Ave Springfield, MO, 65806
Springfield, MO
 
Westlake Ace Hardware
(417) 887-8601
2350 S Campbell Ave
Springfield, MO
 

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker