American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Heavy Lathe with Extra Capacity Williston ND

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

Williston - Auth Hometown
(701) 572-6000
2308 11Th Ave West
Williston, ND
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

Williston True Value
(701) 572-7300
10 E 26th Street
Williston, ND
 
Mertz Construction & Supply
(701) 349-3209
45 West Main
Ellendale, ND
 
Kindred Implement & True Value Hdw
(701) 428-9119
321 Hwy 46
Kindred, ND
 
Cenex
(701) 754-2252
South Of Napoleon
Napoleon, ND
 
Farmers Union Lumber
(701) 572-8356
320 26th Street E
Williston, ND
 
The Home Depot
(701)282-2078
4700 17th Avenue SW
Fargo, ND
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 12:00pm-8:00pm

Napa Auto Parts/do It Best Hdw
(701) 947-5155
16 North 8th St
New Rockford, ND
 
Cavalier True Value
(701) 265-8855
213 W Main St
Cavalier, ND
 
Lumber Mart
(701) 797-2623
Highway 200 & 45
Cooperstown, ND
 

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker