American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Heavy Lathe with Extra Capacity Winnemucca NV

The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers.

Ace Hardware
(775) 623-4433
930 W Winnemucca Blvd
Winnemucca, NV
 
Brown True Value
(775) 623-2541
221 S Bridge St
Winnemucca, NV
 
The Home Depot
(702)871-5035
4750 S Decatur Blvd
Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(702)434-1948
6025 South Pecos Road
Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(702)399-3566
855 East Dorrell Lane
North Las Vegas, NV
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Big R
(775) 623-2447
3270 West Railroad St
Winnemucca, NV
 
Brown True Value
(800) 642-7392
221 S Bridge St
Winnemucca, NV

Data Provided by:
The Home Depot
(775) 674-2900
2955 Northtowne Ln
Reno, NV
 
The Home Depot
(702)435-9200
1030 Sunset Road
Henderson, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)851-6000
1001 Steamboat Pkwy
Reno, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Heavy Lathe with Extra Capacity

Heavy Lathe with Extra Capacity



So here's a dilemma: Mini lathes are designed to be portable, but when you get where you're going, it's nice to have some weight in the machine. At 106 pounds (more than a sheet of MDF weighs), the Maxi Lathe, $300, from General International outweighs other machines in this category by 20 to 30 pounds. Extra weight is good for damping vibration in a lathe; lugging it around is tougher. General International has set the mini-lathe bar a little higher with the Maxi Lathe's spindle capacity. At 15 in. between centers, it exceeds other mini-lathe capacities by up to 2 in., depending on the model. Its 10-in. bowl capacity is comparable to that of other machines. The Maxi Lathe, model 25-100 M1, has step pulleys at 480, 1,270, 1,960, 2,730, 3,327 and 4,023 rpm for speed control. It's driven by a 1/2-hp motor. Two bed extensions are available. The 25-130 extension, $95, increases the spindle capacity to 35 in. between centers. The 25-125 bed extension, $160, increases the spindle capacity to 45 in.

Source:
General International, (514) 326-1161, www.general.ca, Maxi Lathe, 25-100 M1, $300, Bed extension, 25-130, $95, Bed extension, 25-125, $160.


Click here to read the rest of the article from American Woodworker