American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Hide Away Tool Stand Bedford IN

Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.

Lowe's
(812) 508-3000
3300 16Th Street
Bedford, IN
Hours
M-SA 6:30 am - 10 pm
SU 8 am - 8 pm

Bedford - Auth Hometown
(812) 279-3501
2943 John Williams Blvd
Bedford, IN
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-19
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-19
Sun:12-17

Kmart 7455 / Cross Merch
(812) 275-3022
1320 James Ave
Bedford, IN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Bender Lumber
(812) 279-9737
3120 Brock Lane
Bedford, IN
 
Holmes Hardware
(812) 849-4200
620 Main Street
Mitchell, IN
 
LOWE'S OF BEDFORD, IN
812 508-3000
3300 16TH STREET BEDFORD, IN, 47421
Bedford, IN
 
Georges Gateway True Value
(812) 275-6532
2201 M St
Bedford, IN
 
Fastenal- Bedford
812-277-0749
514 K Street Bedford, IN, 47421
Bedford, IN
 
Ace Hardware/Ben Franklin
(812) 849-2777
1206 W Main St
Mitchell, IN
 
Black Lumber Co., Inc.
(812) 332-7208
1710 S Henderson
Bloomington, IN
 

Hide Away Tool Stand

Hide Away Tool Stand



My bench grinder is out of the way but instantly accessible, thanks to this sturdy flip-up table. It works great and it's simple to make. You'll only need a scrap of 3/4-in. plywood that's 1/2-in. narrower than the overhang, four 3-in. butt hinges, a strap hinge and a length of 1x4.

Build It
1. Mount three butt hinges to the underside of the plywood table, with the barrels centered on the edge.
2. Fasten the table to the benchtop.
3. Install the remaining butt hinge on the far side of the foot. Make sure it's aligned with the outer hinge on the table.
4. Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.
5. Attach one 1x4 to the foot hinge and the other to the top hinge. Rejoin the two halves by attaching the strap hinge.
6. Fasten the 10-in.-long brace lock to the upper 1x4.
7. Install pivoting support blocks to hold the table in the folded-under position.
8. Open the table and install the benchtop tool of your choice.

 

Click here to read the rest of the article from American Woodworker