American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Hide Away Tool Stand Mustang OK

Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.

The Home Depot
(405)789-3895
6800 W Reno Avenue
Oklahoma City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)773-6077
7620 NW Expressway
Oklahoma City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)895-6064
650 SW 19th Street
Moore, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)579-7700
850 Ed Noble Pkwy
Norman, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)737-3410
1600 S Sooner Road
Midwest City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)843-5008
3040 NW 59th Street
Oklahoma City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(405)631-9600
7400 S Shields Blvd
Oklahoma City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Oklahoma City, OK
(405) 748-8844
9301 North May Avenue
Oklahoma City, OK

Data Provided by:
The Home Depot
(405)749-1590
14201 N Pennsylvania Ave
Oklahoma City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's
(405) 367-2000
1000 East State Highway 152
Mustang, OK
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Data Provided by:

Hide Away Tool Stand

Hide Away Tool Stand



My bench grinder is out of the way but instantly accessible, thanks to this sturdy flip-up table. It works great and it's simple to make. You'll only need a scrap of 3/4-in. plywood that's 1/2-in. narrower than the overhang, four 3-in. butt hinges, a strap hinge and a length of 1x4.

Build It
1. Mount three butt hinges to the underside of the plywood table, with the barrels centered on the edge.
2. Fasten the table to the benchtop.
3. Install the remaining butt hinge on the far side of the foot. Make sure it's aligned with the outer hinge on the table.
4. Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.
5. Attach one 1x4 to the foot hinge and the other to the top hinge. Rejoin the two halves by attaching the strap hinge.
6. Fasten the 10-in.-long brace lock to the upper 1x4.
7. Install pivoting support blocks to hold the table in the folded-under position.
8. Open the table and install the benchtop tool of your choice.

 

Click here to read the rest of the article from American Woodworker