American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Hide Away Tool Stand Westborough MA

Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.

Lowe's
(508) 614-1152
260-266 Turnpike Road
Westborough, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Lowe's
(508) 282-4016
40 Fortune Boulevard
Milford, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Grafton Square True Value Hdwe
(508) 754-0044
113 Hamilton St
Worcester, MA
 
Rays True Value Hardware
(508) 865-9037
22 Howe Ave
Millbury, MA
 
Lowe's
(508) 595-1450
533 Lincoln Street
Worcester, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Village Lumber&true Value Hdw.
(508) 366-8222
1 Phillips St
Westborough, MA
 
Monnick Supply
(508) 624-7070
222a East Main Street
Marlborough, MA
 
Marlborough - A
(508) 357-6200
521 Lynch Blvd
Marlborough, MA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:8-21
Sun:10-18.5

Holliston True Value
(508) 429-4404
58 Central St
Holliston, MA
 
Monnick Supply Company
(508) 875-1810
759 Waverly Street
Framingham, MA
 

Hide Away Tool Stand

Hide Away Tool Stand



My bench grinder is out of the way but instantly accessible, thanks to this sturdy flip-up table. It works great and it's simple to make. You'll only need a scrap of 3/4-in. plywood that's 1/2-in. narrower than the overhang, four 3-in. butt hinges, a strap hinge and a length of 1x4.

Build It
1. Mount three butt hinges to the underside of the plywood table, with the barrels centered on the edge.
2. Fasten the table to the benchtop.
3. Install the remaining butt hinge on the far side of the foot. Make sure it's aligned with the outer hinge on the table.
4. Make the hinged brace from two 1x4s of equal length. The brace's overall length is the distance between the barrels of the two centered hinges with the table fully open.
5. Attach one 1x4 to the foot hinge and the other to the top hinge. Rejoin the two halves by attaching the strap hinge.
6. Fasten the 10-in.-long brace lock to the upper 1x4.
7. Install pivoting support blocks to hold the table in the folded-under position.
8. Open the table and install the benchtop tool of your choice.

 

Click here to read the rest of the article from American Woodworker