American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Jointing with a Planer Cedar Rapids IA

The boards for my table were only 4-ft. long and the sled is about 6-in. longer. This technique works equally well for longer boards although you will need a longer sled and you may need additional shims along the sides.

The Home Depot
(319)294-0480
4501 1st Avenue SE
Cedar Rapids, IA
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Lindale Plz S/C
(319) 395-6200
4600 1St Ave Ne
Cedar Rapids, IA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:11-18

White Cap- Cedar Rapids
(319) 247-2142
830 33rd Ave, SW Cedar Rapids, IA, 52404
Cedar Rapids, IA
 
Cedar Rapids - Auth Hometwn
(319) 365-4182
2020 16Th Ave Sw
Cedar Rapids, IA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17

Edgewood Hardware
(319) 396-2837
340 Edgewood Rd Nw
Cedar Rapids, IA
 
Amana Society Forestry
(319) 622-7554
1300 220th Trail PO Box 189
Amana, IA

Data Provided by:
Campbell Supply Co/Cedar Rapid
319 395 0991
2127 North Towne Lane NE Cedar Rapids, IA, 52410
Cedar Rapids, IA
 
Acme Tools- Cedar Rapids
319-363-2211
1943 Blairs Ferry Rd NE Cedar Rapids, IA, 52402
Cedar Rapids, IA
 
Lowe's
(319) 294-3780
5300 Blairs Forest Blvd Ne
Cedar Rapids, IA
Hours
M-SA 6:30 am - 9 pm
SU 8 am - 7 pm

Lowe's of Cedar Rapids
319-294-3780
5300 Blairs Forest Blvd NE Cedar Rapids, IA, 52402
Cedar Rapids, IA
 
Data Provided by:

Jointing with a Planer

Jointing with a Planer

    

 

I came across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for my jointer and I didn't want to rip them any narrower. I solved my dilemma with this planer sled that allows me to use my planer as a jointer. The trick is to keep the board from rocking during planing. A wood shim under the high corner is all it takes. I add hot-melt glue to the shim and all four corners of the board to keep them from shifting on the sled during planing. Once I have one side planed flat I take the board off the sled, flip it over and plane the other side. The boards for my table were only 4-ft. long and the sled is about 6-in. longer. This technique works equally well for longer boards although you will need a longer sled and you may need additional shims along the sides.

Back to Workshop Tips Index

Click here to read the rest of the article from American Woodworker