American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Larger-Capacity Akeda Jig Avondale AZ

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers.

The Home Depot
(623)925-2896
1489 N Dysart Rd
Avondale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)849-1200
7333 McDowell
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Home Depot Store 0453
(623) 412-1750
9201 W. Peoria
Peoria, AZ
 
The Home Depot
(623)849-0125
4848 N 43rd Avenue
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)544-1129
13760 W Bell Rd
Surprise, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)772-1034
9969 W Camelback Road
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(602)605-8690
5230 W Baseline Road
Laveen, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)412-1750
9201 W Peoria Ave
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)487-7357
5902 W Peoria Ave
Glendale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)376-6735
25650 N Lke Pleasant Pky
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Larger-Capacity Akeda Jig

Larger-Capacity Akeda Jig

 

   

 

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers. The Akeda DC16 and BC24 jigs excel at creating variable-spaced half-blind or through dovetails. (Variable-spaced dovetails generally have wide tails and narrow pins, following the tradition of hand-cut work.) The guide fingers may be positioned anywhere along the jig in 1/8-in. increments. These jigs offer five different dovetail angles, from 7 degrees to 20 degrees, for 1/4-in. to 3/4-in.-thick  stock. (A new 6-degree bit and pin guide for 1 in. stock will be available sometime this year.) Why all the choices? Akeda suggests that dovetails with a wide angle look best in thin stock, and are stronger, while dovetails with a narrow angle are best used for thick stock. These angles are produced by using five matched sets of guide fingers and dovetail bits. Using the Akeda is very simple. You don't have to adjust the jig or do a lot of trial-and-error cutting to get the joint to fit right. The key to this simplicity is a set of dovetail bits and Porter-Cable-style guide bushings manufactured by Akeda. Standard bits and bushings won't work. The basic jigs do not come with any bits, however; they're available in various sets to suit your needs. Akeda bits have 8 mm shanks, which produce less vibration than bits with smaller 1/4-in. shanks. You'll need a reducer, available from Akeda, to use them in a 1/2-in. collet. The dust collection port, which works very well, is a $30 accessory.

Source
Akeda, www.akeda.com, (877) 387-6544, Akeda BC24 Blanket Chest Jig, $440;  BC24 Jig, 7 pc. Bit Set and Dust Collector Kit, $499.


Click here to read the rest of the article from American Woodworker