American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Larger-Capacity Akeda Jig Johnston RI

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers.

The Home Depot
(401)823-5173
700 Centre Of N E Blvd
Coventry, RI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Mt. Pleasant True Value Hdw.
(401) 351-7200
249 Academy Ave
Providence, RI
 
Lowe's
(401) 275-2250
247 Garfield Avenue
Cranston, RI
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Durfee True Value Hdw.
(401) 461-0800
65 Rolfe Sq
Cranston, RI
 
Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
Hardware On The Square True Value
(401) 831-1400
1911 Westminster St
Providence, RI
 
Lowe's
(401) 215-1596
1703 Mineral Springs Avenue
North Providence, RI
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Kamco True Value
(401) 463-5266
37 Amflex Dr
Cranston, RI
 
Standard Do it Best Hardware
(401) 438-1420
360 Taunton Ave
East Providence, RI
 
Data Provided by:

Larger-Capacity Akeda Jig

Larger-Capacity Akeda Jig

 

   

 

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers. The Akeda DC16 and BC24 jigs excel at creating variable-spaced half-blind or through dovetails. (Variable-spaced dovetails generally have wide tails and narrow pins, following the tradition of hand-cut work.) The guide fingers may be positioned anywhere along the jig in 1/8-in. increments. These jigs offer five different dovetail angles, from 7 degrees to 20 degrees, for 1/4-in. to 3/4-in.-thick  stock. (A new 6-degree bit and pin guide for 1 in. stock will be available sometime this year.) Why all the choices? Akeda suggests that dovetails with a wide angle look best in thin stock, and are stronger, while dovetails with a narrow angle are best used for thick stock. These angles are produced by using five matched sets of guide fingers and dovetail bits. Using the Akeda is very simple. You don't have to adjust the jig or do a lot of trial-and-error cutting to get the joint to fit right. The key to this simplicity is a set of dovetail bits and Porter-Cable-style guide bushings manufactured by Akeda. Standard bits and bushings won't work. The basic jigs do not come with any bits, however; they're available in various sets to suit your needs. Akeda bits have 8 mm shanks, which produce less vibration than bits with smaller 1/4-in. shanks. You'll need a reducer, available from Akeda, to use them in a 1/2-in. collet. The dust collection port, which works very well, is a $30 accessory.

Source
Akeda, www.akeda.com, (877) 387-6544, Akeda BC24 Blanket Chest Jig, $440;  BC24 Jig, 7 pc. Bit Set and Dust Collector Kit, $499.


Click here to read the rest of the article from American Woodworker