American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Larger-Capacity Akeda Jig Salt Lake City UT

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers.

MacBeath Hardwood Company
(801) 484-7616
1576 So. 300 West
Salt Lake City, UT

Data Provided by:
The Home Depot
(801)461-4248
3398 S Highland Drive
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)567-0700
1310 E Park Centre Dr
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Salt Lake City
(801) 566-5652
9891 South 500 West
Sandy, UT

Data Provided by:
The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)467-3900
328 West 2100 South St
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)963-4700
4581 S 4000 W
West Valley City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)256-9229
1538 W 9000 South
West Jordan, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)523-0069
135 E 11400 South
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)292-0238
50 N Market Place Dr
Centerville, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Larger-Capacity Akeda Jig

Larger-Capacity Akeda Jig

 

   

 

We gave the 16-in. Akeda dovetail jig our Editor's Choice award last year because it was precise and easy to use. Akeda has recently introduced a 24-in. model, suitable for a blanket chest or other large casework, using the same clever system of snap-in, indexed guide fingers. The Akeda DC16 and BC24 jigs excel at creating variable-spaced half-blind or through dovetails. (Variable-spaced dovetails generally have wide tails and narrow pins, following the tradition of hand-cut work.) The guide fingers may be positioned anywhere along the jig in 1/8-in. increments. These jigs offer five different dovetail angles, from 7 degrees to 20 degrees, for 1/4-in. to 3/4-in.-thick  stock. (A new 6-degree bit and pin guide for 1 in. stock will be available sometime this year.) Why all the choices? Akeda suggests that dovetails with a wide angle look best in thin stock, and are stronger, while dovetails with a narrow angle are best used for thick stock. These angles are produced by using five matched sets of guide fingers and dovetail bits. Using the Akeda is very simple. You don't have to adjust the jig or do a lot of trial-and-error cutting to get the joint to fit right. The key to this simplicity is a set of dovetail bits and Porter-Cable-style guide bushings manufactured by Akeda. Standard bits and bushings won't work. The basic jigs do not come with any bits, however; they're available in various sets to suit your needs. Akeda bits have 8 mm shanks, which produce less vibration than bits with smaller 1/4-in. shanks. You'll need a reducer, available from Akeda, to use them in a 1/2-in. collet. The dust collection port, which works very well, is a $30 accessory.

Source
Akeda, www.akeda.com, (877) 387-6544, Akeda BC24 Blanket Chest Jig, $440;  BC24 Jig, 7 pc. Bit Set and Dust Collector Kit, $499.


Click here to read the rest of the article from American Woodworker