American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Leigh Mortise and Tenon Jig Gwynn Oak MD

After giving the FMT a thorough workout on a couple of practice chairs my enthusiasm has returned. It takes a few hours and some patience to master the numerous adjustments, but once you do, the jig becomes a real pleasure to use.

The Home Depot
(410)719-9200
6000 Baltimore Natl Pike
Catonsville, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)247-8044
3750 Commerce Drive
Halethorpe, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)356-1037
9818 Reisterstown Rd
Owings Mills, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

World of Hardwoods
(410) 636-3991
809 Barkwood Court
Linthicum, MD

Data Provided by:
The Home Depot
(410)631-4440
6315 Eastern Avenue
Baltimore, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)358-4046
6620 Reisterstown Rd
Baltimore, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)496-7041
8729 Liberty Road
Randallstown, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(410)750-2199
9190 Baltimore Natl Pike
Ellicott City, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Freestate Timbers
(410) 561-9444
9572 Deereco Road
Timonium, MD

Data Provided by:
Woodcraft - Towson/Baltimore
(410) 828-7426
Towson Overlook
Towson, MD

Data Provided by:
Data Provided by:

Leigh Mortise and Tenon Jig

Leigh Mortise and Tenon Jig

Spot-on accuracy and utmost flexibility--for a price. 

by Randy Johnson

The Leigh Frame Mortise and Tenon Jig (FMT) makes perfect straight and angled mortise and tenon joints in a huge variety of sizes. 

I was excited to give this tool a try. I’ve been dreaming for years about building a set of dining room chairs, but the thought of making all those mortises and tenons always dampened my enthusiasm. 

After giving the FMT a thorough workout on a couple of practice chairs my enthusiasm has returned. It takes a few hours and some patience to master the numerous adjustments, but once you do, the jig becomes a real pleasure to use. 

The FMT base unit retails for around $700 (see Sources, page 83). That’s a lot of cash, but we found the quality and performance of the jig are truly exceptional. It’s a tool that small professional shops or those who want a dedicated mortise and tenon machine will find well worth the investment. 

The FMT base package includes the main jig, a router sub-base, five joint guides, a 5/16-in. spiral router bit and a thick, well-written owner’s manual (Photo 1). The sub-base comes with mounting hardware and can be attached to any currently available plunge router. 

This basic setup enables you to cut 5/16-in.-thick tenons that are 1/2-in. to 1-1/2-in. wide, plus the corresponding mortises. Additional joint guides and router bits are available as options. With them you can make 17 additional standard-size joints as large as 1/2-in. thick by 2-1/2-in. wide and as small as 1/4-in. thick by 5/16-in. wide. By combining different router bits and guide templates you can make joints as small as 1/16 in. by 1/8 in. Now that’s a tiny joint! With all the options, the price of the FMT is over $900.

How it Works

The basic principle behind the jig is that the router sub-base has two guide pins that follow corresponding guides in the top of the main jig (Photo 1 and Fig. A).

The joint guide is interchangeable and  width and length of the joint. The tracking guide is fixed. Its function is simply to direct the right side of the router side to side. The guide pins are tapered and can be adjusted up and down, which makes them ride tighter or looser against the joint and tracking guides. You control the fit of the joint by adjusting the pins. Turning the pins one-eighth turn will change the joint fit by .001 in. Getting good-fitting joints is a cinch considering that a mortise and tenon joint should have about .005 in. of clearance for glue. 

The FMT produces only round-ended mortises and tenons (Photo 2). If you want a square joint you’ll have to trim the parts by hand or with another power tool. This machine also makes angle tenons, thanks to a pivoting front plate (Photo 3). This feature came in really handy when I cut the angled joinery on my dining room chairs.

Click here to read the rest of the article from American Woodworker