American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Long-Reach Stop for Crosscut Sled Brigham City UT

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

The Home Depot
(801)393-0106
984 Wall Avenue
Ogden, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hardware
(435) 257-5034
250 E Main St
Tremonton, UT
 
Wangsgards
(801) 393-8423
120 N Washington Blvd, 5 points in Ogden
Ogden, UT
 
Smith & Edwards Co Inc
(801) 731-1120
3936 N Highway 126, exit 351 off I-15
Ogden, UT
 
The Home Depot
(801)543-2296
449 N. Main St
Layton, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Greer's Do it Best Hardware
(435) 257-7749
28 West Main Street
Tremonton, UT
 
Lowe's of Ogden, UT
801-398-5460
344 N Washington Boulevard Ogden, UT, 84404
Ogden, UT
 
Lowe's
(801) 398-5460
344 N. Washington Boulevard
Ogden, UT
Hours
M-SA 6 am - 10 pm
SU 8 am - 9 pm

The Home Depot
(435)865-5305
1518 S Providence Ctr Av
Cedar City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

MacBeath Hardwood Company
(801) 484-7616
1576 So. 300 West
Salt Lake City, UT

Data Provided by:
Data Provided by:

Long-Reach Stop for Crosscut Sled

Long-Reach Stop for Crosscut Sled



I built the “Ultimate Crosscut Sled” featured in AW #75 (October 1999).It works great, and recently I've added an adjustable stop, which makesit even better. I thought other AW readers would be interested in myupgrade. My 50-in.-capacity stop consists of scrap wood, a 48-in.length of
T-track (I used Mini Track from www.prairieriverwoodworking.com),1/4-20 hex-head bolts and a couple of plastic knobs. I spent less than$25. My stop makes repetitive crosscutting of long stock—shelves for abookcase, for instance—a breeze. Any hardwood will do for the rail andstop; I used a 7/8-in. x 2-in. x 60-in. piece of hickory. You canincrease the crosscut capacity by using a longer rail. I cut a stoppeddado in the back of the rail to house the T-track, which I installedwith screws. I attached the stop to the end of the rail with a gluedhalf-lap joint. I counterbored a pair of holes in the sled's fence andinstalled the bolts and knobs.

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Click here to read the rest of the article from American Woodworker