American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Long-Reach Stop for Crosscut Sled Charlotte NC

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

The Home Depot
(704)365-1291
1220 N Wendover Rd
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)522-8383
4750 South Boulevard
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)544-2877
10210 Centrum Pkwy
Pineville, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Matthews, NC
(704) 847-8300
1725 Windsor Square Drive
Matthews, NC

Data Provided by:
The Home Depot
(704)535-6982
9501 Albemarle Rd
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)596-1550
8135 University Cty Blvd
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)504-9836
14310 Rivergate Pkwy
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)814-6131
5415 Ballantyne Cmmns Pk
Charlotte, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)845-9200
1837 Matthews Twnsp Pkwy
Matthews, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(704)865-9532
2870 E Franklin Blvd
Gastonia, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Long-Reach Stop for Crosscut Sled

Long-Reach Stop for Crosscut Sled



I built the “Ultimate Crosscut Sled” featured in AW #75 (October 1999).It works great, and recently I've added an adjustable stop, which makesit even better. I thought other AW readers would be interested in myupgrade. My 50-in.-capacity stop consists of scrap wood, a 48-in.length of
T-track (I used Mini Track from www.prairieriverwoodworking.com),1/4-20 hex-head bolts and a couple of plastic knobs. I spent less than$25. My stop makes repetitive crosscutting of long stock—shelves for abookcase, for instance—a breeze. Any hardwood will do for the rail andstop; I used a 7/8-in. x 2-in. x 60-in. piece of hickory. You canincrease the crosscut capacity by using a longer rail. I cut a stoppeddado in the back of the rail to house the T-track, which I installedwith screws. I attached the stop to the end of the rail with a gluedhalf-lap joint. I counterbored a pair of holes in the sled's fence andinstalled the bolts and knobs.

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Click here to read the rest of the article from American Woodworker