American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Long-Reach Stop for Crosscut Sled Cody WY

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Cody Ace Hardware
(307) 587-8555
2201 17th St, K-Mart and McDonald's
Cody, WY
 
Aldrich Home Center Of Cody
(307) 587-2263
308 19th Street
Cody, WY
 
Titan Truss
(307) 587-2187
2828 Chopper Lane
Cody, WY
 
The Home Depot
(307)632-2897
1740 Fleischli Pkwy
Cheyenne, WY
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(307)674-6669
2050 Coffeen Avenue
Sheridan, WY
Hours
Mon-Sat: 7:00am-8:00pm
Sun: 8:00am-8:00pm

Gambles
(307) 587-4461
1007 12th Street
Cody, WY
 
Bloedorn Lumber Bldg Materials
(307) 587-2223
1902 Big Horn Ave
Cody, WY
 
Diamond Concrete Design
(307) 222-4730
721 15th Street, Suite A
Cody, WY
 
The Home Depot
(307)362-3716
1925 Foothill Blvd
Rock Springs, WY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(307)472-6505
4900 East 2nd Street
Casper, WY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Long-Reach Stop for Crosscut Sled

Long-Reach Stop for Crosscut Sled



I built the “Ultimate Crosscut Sled” featured in AW #75 (October 1999).It works great, and recently I've added an adjustable stop, which makesit even better. I thought other AW readers would be interested in myupgrade. My 50-in.-capacity stop consists of scrap wood, a 48-in.length of
T-track (I used Mini Track from www.prairieriverwoodworking.com),1/4-20 hex-head bolts and a couple of plastic knobs. I spent less than$25. My stop makes repetitive crosscutting of long stock—shelves for abookcase, for instance—a breeze. Any hardwood will do for the rail andstop; I used a 7/8-in. x 2-in. x 60-in. piece of hickory. You canincrease the crosscut capacity by using a longer rail. I cut a stoppeddado in the back of the rail to house the T-track, which I installedwith screws. I attached the stop to the end of the rail with a gluedhalf-lap joint. I counterbored a pair of holes in the sled's fence andinstalled the bolts and knobs.

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Click here to read the rest of the article from American Woodworker