American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Long-Reach Stop for Crosscut Sled Windsor CT

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Woodcraft - Manchester/Hartford, CT
(860) 647-0303
249 Spencer Street
Manchester, CT

Data Provided by:
Connecticut Wood Group's Hardwood Outlet
(860) 253-0444
18 Mullen Road
Enfield, CT

Data Provided by:
The Home Depot
(413)731-9700
179 Dagget Drive
West Springfield, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)828-9440
225 Berlin Turnpike
Berlin, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(860)231-1919
503 New Park Ave
West Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 9:00am-6:00pm

Woodcraft - West Springfield
(413) 827-0244
239A Memorial Ave
West Springfield, MA

Data Provided by:
The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Long-Reach Stop for Crosscut Sled

Long-Reach Stop for Crosscut Sled



I built the “Ultimate Crosscut Sled” featured in AW #75 (October 1999).It works great, and recently I've added an adjustable stop, which makesit even better. I thought other AW readers would be interested in myupgrade. My 50-in.-capacity stop consists of scrap wood, a 48-in.length of
T-track (I used Mini Track from www.prairieriverwoodworking.com),1/4-20 hex-head bolts and a couple of plastic knobs. I spent less than$25. My stop makes repetitive crosscutting of long stock—shelves for abookcase, for instance—a breeze. Any hardwood will do for the rail andstop; I used a 7/8-in. x 2-in. x 60-in. piece of hickory. You canincrease the crosscut capacity by using a longer rail. I cut a stoppeddado in the back of the rail to house the T-track, which I installedwith screws. I attached the stop to the end of the rail with a gluedhalf-lap joint. I counterbored a pair of holes in the sled's fence andinstalled the bolts and knobs.

T-track makes the stop easy to install and adjust. When the stopisn't necessary, tightening the knobs draws the bolts into thecounterbored holes, so they don't protrude.

Click here to read the rest of the article from American Woodworker