American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Make New Varnish Look Old Brookings SD

It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood.

Homestead Building Supplies
(605) 692-6191
823 S Main Avenue
Brookings, SD
 
Ace Hardware
(605) 697-5223
710 22nd Ave S, Brookings Mall
Brookings, SD
 
Lowe's of Brookings
605-696-2730
812 25th Ave Brookings, SD, 57006
Brookings, SD
 
J & K Building Center
(605) 997-3714
110 S Wind
Flandreau, SD
 
Winner True Value
(605) 842-1830
205 Main
Winner, SD
 
Lowe's
(605) 696-2730
812 25Th Avenue
Brookings, SD
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Brookings Rent-All
(605) 697-5544
803 Main Avenue South
Brookings, SD
 
Fastenal- Brookings
605-697-6631
1321 Main Avenue South Brookings, SD, 57006
Brookings, SD
 
The Home Depot
(605)361-7439
2523 S Louise Ave
Sioux Falls, SD
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Nygrens True Value
(605) 624-6725
9 Court St
Vermillion, SD
 

Make New Varnish Look Old

Make New Varnish Look Old


Q. I built my own kitchen cabinets a few years back. One drawer got damaged, so I stripped the finish from the drawer front, made the repair and applied a fresh coat of polyurethane. The new finish is noticeably lighter than the old one. I sure don't want to refinish the entire kitchen. Is there a way to match the aged finish?

A. The solution is to tint the new finish with dye. Varnish yellows with age and that's the reason your newly finished drawer doesn't match the old. I recommend using a dye called Orange Shellac from Wood Finishing Supplies. Don't let the name fool you; it's just a color and has nothing to do with real orange shellac. It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood. It will take some experimentation to get the dye-to-polyurethane ratio correct. Brush a couple of coats of the tinted poly on a test board. If the color matches, your formulating is done. If not, adjust the number of coats or the amount of dye until you get a good match.


#

Wood Finishing Supplies, (866) 548-1677, www.woodfinishingsupplies.com,2-oz. bottles of Color FX liquid dye, concentrates for oil-based media,Orange Shellac, $10.

Click here to read the rest of the article from American Woodworker