American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Make New Varnish Look Old Clackamas OR

It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood.

The Home Depot
(503)723-3181
2002 Washington Street
Oregon City, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)252-0188
11633 NE Glen Widing Dr
Portland, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)674-3944
25101 SE Stark Street
Troutdale, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(360)254-6289
330 SE 192nd Ave
Vancouver, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)639-3500
14800 SW Sequoia Parkway
Tigard, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)261-8543
10120 SE Washington St
Portland, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodcrafters
(800) 777-3709
212 NE 6th Ave
Portland, OR

Data Provided by:
Goby Walnut Products
(503) 477-6744
5315 NW St. Helens Rd.
Portland, OR

Data Provided by:
Woodcraft - Portland, OR
(503) 684-1428
12020 SW Main Street
Tigard, OR

Data Provided by:
Gilmer Wood Company
(503) 274-1271
2211 NW Saint Helens Road
Portland, OR

Data Provided by:
Data Provided by:

Make New Varnish Look Old

Make New Varnish Look Old


Q. I built my own kitchen cabinets a few years back. One drawer got damaged, so I stripped the finish from the drawer front, made the repair and applied a fresh coat of polyurethane. The new finish is noticeably lighter than the old one. I sure don't want to refinish the entire kitchen. Is there a way to match the aged finish?

A. The solution is to tint the new finish with dye. Varnish yellows with age and that's the reason your newly finished drawer doesn't match the old. I recommend using a dye called Orange Shellac from Wood Finishing Supplies. Don't let the name fool you; it's just a color and has nothing to do with real orange shellac. It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood. It will take some experimentation to get the dye-to-polyurethane ratio correct. Brush a couple of coats of the tinted poly on a test board. If the color matches, your formulating is done. If not, adjust the number of coats or the amount of dye until you get a good match.


#

Wood Finishing Supplies, (866) 548-1677, www.woodfinishingsupplies.com,2-oz. bottles of Color FX liquid dye, concentrates for oil-based media,Orange Shellac, $10.

Click here to read the rest of the article from American Woodworker