American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Make New Varnish Look Old Knightdale NC

It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood.

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)878-8771
4901 Capital Blvd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)562-2202
11915 Retail Drive
Wake Forest, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
Klingspor’s Woodworking Shop of Raleigh
(919) 876-0707
3141 Capital Blvd.Capital Square
Raleigh, NC

Data Provided by:
The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Make New Varnish Look Old

Make New Varnish Look Old


Q. I built my own kitchen cabinets a few years back. One drawer got damaged, so I stripped the finish from the drawer front, made the repair and applied a fresh coat of polyurethane. The new finish is noticeably lighter than the old one. I sure don't want to refinish the entire kitchen. Is there a way to match the aged finish?

A. The solution is to tint the new finish with dye. Varnish yellows with age and that's the reason your newly finished drawer doesn't match the old. I recommend using a dye called Orange Shellac from Wood Finishing Supplies. Don't let the name fool you; it's just a color and has nothing to do with real orange shellac. It's best to keep the tinting very light so two or three coats of the polyurethane give you the color that matches your old finish. For one drawer, pour a small amount of polyurethane into a container. Add a few drops of the dye concentrate, mixing it in well. It'll look like a dark olive oil, which seems weird, but the color looks a whole lot different on the wood. It will take some experimentation to get the dye-to-polyurethane ratio correct. Brush a couple of coats of the tinted poly on a test board. If the color matches, your formulating is done. If not, adjust the number of coats or the amount of dye until you get a good match.


#

Wood Finishing Supplies, (866) 548-1677, www.woodfinishingsupplies.com,2-oz. bottles of Color FX liquid dye, concentrates for oil-based media,Orange Shellac, $10.

Click here to read the rest of the article from American Woodworker